Torrents Search Engine
Search Any Type Of Torrents
Torrent Details
-
CBT Nuggets - Cisco Certification Training 200-301 Cisco CCNA
-
1-Introduction to CCNA (200-301) with Jeremy
-
1. Introduction to CCNA (200-301) with Jeremy.ts - 10.81 MB
-
-
10-Discern Copper and Fiber Optic Network Cable Characteristics
-
1. Introduction Connect Networks with Copper and Fiber Optic Cable.ts - 3.77 MB
-
2. Copper Cable.ts - 41.09 MB
-
3. Two Styles of Fiber.ts - 31.06 MB
-
4. Fiber Port Types.ts - 42.47 MB
-
5. Part 1 Connecting the CCNA Lab.ts - 37.54 MB
-
-
11-Connect and Navigate Cisco Internetwork Operating System (IOS)
-
1. Introduction to Connect and Navigate Cisco Internetwork Operating System (IOS).ts - 6.81 MB
-
10. Review of Connect and Navigate Cisco Internetwork Operating System (IOS).ts - 23.28 MB
-
2. Methods of Managing Cisco Devices.ts - 41.4 MB
-
3. Configuring a Console Connection in Windows.ts - 33.58 MB
-
4. Configuring a Console Connection in MacOS.ts - 27.45 MB
-
5. Answering the Epic Post-Boot Question.ts - 38.83 MB
-
6. Using Cisco IOS Navigation Commands.ts - 53.13 MB
-
7. Modes that Made Cisco Famous.ts - 50.83 MB
-
8. Interface Connections and Numbering.ts - 27.59 MB
-
9. Preparing for the Initial Configuration.ts - 109.21 MB
-
-
12-Create a Base Configuration for Cisco Devices
-
1. Introduction to Create a Base Configuration for Cisco Devices.ts - 6.1 MB
-
2. Configuring Device Identification (Hostname and Banner).ts - 37.72 MB
-
3. Configuring Foundation Security and Passwords (Console, VTY, Enable Sec).ts - 67.2 MB
-
4. Configuring IP Addresses and Enabling Interfaces.ts - 44.03 MB
-
5. Initial Tuning and Configuration Management.ts - 64.57 MB
-
6. Telnet and SSH Implementation.ts - 71.21 MB
-
7. Ensuring Proper Base Configurations.ts - 169.61 MB
-
8. Review of Create a Base Configuration for Cisco Devices.ts - 22.29 MB
-
-
13-Create a Base Configuration for Cisco Devices Hands-On Lab
-
1. Introduction to Your Virtual Hands-on Labs.ts - 4.05 MB
-
2. Basic IOS Navigation Lab.ts - 67.14 MB
-
3. Hostnames and MOTD Banners Lab.ts - 33.25 MB
-
4. Configuring and Verifying Interfaces and IP Addresses Lab.ts - 45.36 MB
-
5. Configure DNS and Router Interfaces.ts - 48.26 MB
-
6. Cisco Router and Switch CLI Review Lab.ts - 18.38 MB
-
7. Review of Hands-On Lab.ts - 15.51 MB
-
-
14-Wireshark Fundamentals Capturing, Viewing, and Filtering Data
-
1. Introducing Wireshark Fundamentals.ts - 3.41 MB
-
2. Performing an Initial Capture.ts - 45.49 MB
-
3. The OSI Model in Wireshark.ts - 51.66 MB
-
4. Learning from Idle Network Data.ts - 50.17 MB
-
5. Practical Wireshark ARP.ts - 27.37 MB
-
6. Practical Wireshark Rogue DHCP.ts - 37.88 MB
-
7. Practical Wireshark DNS.ts - 32.67 MB
-
8. Practical Wireshark Telnet.ts - 23.02 MB
-
9. Reviewing Wireshark Fundamentals.ts - 22.7 MB
-
-
15-Describe and Analyze TCP and UDP Communication
-
1. Introduction to Describe and Analyze TCP and UDP Communication.ts - 4.11 MB
-
2. How TCP Starts a Session.ts - 70.91 MB
-
3. How TCP Sends Data (TCP Windowing).ts - 42.22 MB
-
4. How TCP Ends a Session.ts - 40.14 MB
-
5. How UDP Communicates.ts - 48.23 MB
-
6. Review of Describe and Analyze TCP and UDP Communication.ts - 22.71 MB
-
-
16-Configure Windows, MAC, or Linux for Network Access
-
1. Introduction to Configure Windows, MAC, or Linux for Network Access.ts - 5.84 MB
-
2. Configuring and Testing Windows Network Access.ts - 45.94 MB
-
3. Configuring and Testing MacOS Network Access.ts - 29.64 MB
-
4. Configuring and Testing Ubuntu Linux Network Access.ts - 66.84 MB
-
5. Review of Configure Windows, MAC, or Linux for Network Access.ts - 9.86 MB
-
-
17-Describe Network Switch Functions and How to Locate Network Devices
-
2. Connecting Devices to a Switch.ts - 31.72 MB
-
3. Switches Learning MAC Addresses.ts - 54.8 MB
-
4. Viewing and Filtering MAC Address Tables.ts - 37.12 MB
-
5. Locating Devices on a Network Switch.ts - 78.92 MB
-
6. Locating Devices Lab.ts - 35.43 MB
-
7. Review of Describe Network Switch Functions and How to Locate Network Devices.ts - 13.32 MB
-
-
18-Diagnose Interface Status, Errors, and Cabling Issues on a Cisco Switch
-
2. Common Copper and Fiber Physical Issues.ts - 55.23 MB
-
3. The Quick Way to See Interface Status.ts - 30.3 MB
-
4. Examining Speed and Duplex Mismatches.ts - 40.58 MB
-
5. Deep-Dive Into Interface Counters.ts - 98.06 MB
-
-
19-Describe Power over Ethernet (PoE) Capabilities and Standards
-
1. Introduction to Describe Power over Ethernet (PoE) Capabilities and Standards.ts - 5.06 MB
-
2. How Power over Ethernet (PoE) Works.ts - 44.8 MB
-
3. Exploring PoE Standards.ts - 42.68 MB
-
4. PoE in Action on a Cisco Switch.ts - 26.9 MB
-
5. Review of Describe Power over Ethernet (PoE) Capabilities and Standards.ts - 13.87 MB
-
-
2-Introduction to CCNA (200-301) with Keith
-
1. Introduction to CCNA (200-301) with Keith.ts - 39.6 MB
-
-
20-Explain IP Addressing and Subnetting Concepts
-
1. Introduction to Explain IP Addressing and Subnetting Concepts.ts - 4.7 MB
-
2. The Classes of Addresses from A to E.ts - 58.81 MB
-
3. The Fundamentals of IP, Mask, and Gateway.ts - 63.54 MB
-
4. Public and Private Address Ranges.ts - 80.92 MB
-
5. Network Designs that Require Subnetting.ts - 49.84 MB
-
6. Review of Explain IP Addressing and Subnetting Concepts.ts - 13.76 MB
-
-
21-Convert Decimal to Binary and Back
-
1. Introduction to Converting from Decimal to Binary and Back.ts - 3.35 MB
-
2. Process of Binary Conversion.ts - 45.45 MB
-
3. Practicing Decimal to Binary.ts - 35.87 MB
-
4. Practicing Binary to Decimal.ts - 18.29 MB
-
-
22-Perform Subnetting Based on Network Requirements
-
1. Introduction to Perform Subnetting Based on Network Requirements.ts - 3.93 MB
-
2. Subnetting Class C Networks Based on Network Requirements.ts - 89.72 MB
-
3. Subnetting Class B Networks Based on Network Requirements.ts - 70.05 MB
-
4. Subnetting Class A Networks Based on Network Requirements.ts - 45.9 MB
-
5. Troublesome Networks.ts - 31.01 MB
-
6. Review of Perform Subnetting Based on Network Requirements.ts - 58.2 MB
-
-
23-Perform Subnetting Based on Host Requirements
-
1. Introduction to Perform Subnetting Based on Host Requirements.ts - 3.6 MB
-
2. Subnetting Class C Networks Based on Host Requirements.ts - 35.73 MB
-
3. Subnetting Class B Networks Based on Host Requirements.ts - 19.25 MB
-
4. Subnetting Class A Networks Based on Host Requirements.ts - 37.64 MB
-
5. Troublesome Hosts.ts - 30.03 MB
-
6. Additional Examples of Subnetting Based on Host Requirements.ts - 52.17 MB
-
-
24-Reverse Engineering Subnets and Using VLSM
-
1. Introduction to Reverse Engineering Subnets and VLSM.ts - 4.98 MB
-
2. Doing Subnetting Backwards.ts - 32.12 MB
-
3. Practical Reverse Engineering Examples.ts - 60.04 MB
-
4. What is VLSM.ts - 66.76 MB
-
5. VLSM Scenario.ts - 104.39 MB
-
-
25-Describe IPv6 Core Addressing Concepts
-
1. Introduction to Describe IPv6 Core Addressing Concepts.ts - 4.79 MB
-
2. Comparing IPv4 and IPv6.ts - 43.35 MB
-
3. Binary, Decimal, and Hex.ts - 57.37 MB
-
4. Making IPv6 Addresses Shorter.ts - 35.13 MB
-
5. Types of IPv6 Addresses.ts - 95.56 MB
-
6. Designing IPv6 Addressing.ts - 58.17 MB
-
7. Configuring IPv6 Addressing.ts - 48.92 MB
-
8. Configure IPv6 Addressing Lab.ts - 34.57 MB
-
9. Review of Describe IPv6 Core Addressing Concepts.ts - 27.42 MB
-
-
26-Design a Basic Wireless Network
-
1. Introduction to Describe Wireless Frequency and Design Fundamentals.ts - 5.35 MB
-
2. What is a Wireless Signal.ts - 73.19 MB
-
3. Battle of the Bands.ts - 61.95 MB
-
4. Basic and Extended SSIDs and WAP Placement.ts - 57.22 MB
-
5. Review of Describe Wireless Frequency and Design Fundamentals.ts - 24.91 MB
-
-
27-Explain VLANs and Configure VLANs on a Single Switch
-
1. Introduction to Explain VLAN Concepts and Configure VLANs on a Single Switch.ts - 4.57 MB
-
2. How VLANs Changed the World.ts - 67.41 MB
-
3. Routing Between VLANs.ts - 56.11 MB
-
4. Configuring VLANs on a Single Switch.ts - 102.04 MB
-
5. Configuring a Router on a Stick.ts - 90.16 MB
-
6. Configuring VLANs on a Single Switch Lab.ts - 60.26 MB
-
7. Review of Explain VLAN Concepts and Configure VLANs on a Single Switch.ts - 17.03 MB
-
-
28-Configure Trunking Between Switches, WAPs, and Servers
-
1. Introduction to Configure Trunking Between Switches, WAPs, Servers.ts - 4.62 MB
-
10. Review of Configure Trunking Between Switches, WAPs, Servers, and More.ts - 32.97 MB
-
2. Understanding DTP and the Native VLAN.ts - 83.81 MB
-
3. Configuring Trunks the Right Way.ts - 39.97 MB
-
4. Weird and Wacky World of VTP.ts - 39.95 MB
-
5. Configuring VTP.ts - 55.6 MB
-
6. Limiting or Adding VLANs to Trunks.ts - 37.65 MB
-
7. Connecting Trunks to Servers, WAPs, and More.ts - 60.3 MB
-
8. Deploying VLSM in a VLAN Network.ts - 80.21 MB
-
9. Configuring VLANs, Trunking, and Routing Lab.ts - 104.1 MB
-
-
29-Create a Network Diagram with Cisco CDP and LLDP
-
1. Introduction to Create a Network Diagram with Cisco CDP and LLDP.ts - 5.19 MB
-
2. What is CDP and LLDP.ts - 32.79 MB
-
3. Configuring and Tuning CDP and LLDP.ts - 44.04 MB
-
4. Creating a Network Diagram using CDP and LLDP.ts - 36.24 MB
-
5. Creating a Network Diagram with CDP Lab.ts - 25.22 MB
-
6. Review of Create a Network Diagram with Cisco CDP and LLDP.ts - 13.13 MB
-
-
3-Introduction to CCNA (200-301) with NetworkChuck
-
Introduction to CCNA (200-301) with NetworkChuck.ts - 9.61 MB
-
-
30-Design and Configure a Rapid Spanning Tree Protocol (STP) Network
-
1. Introduction to Design and Configure a Rapid Spanning Tree Protocol (STP) Network.ts - 4.71 MB
-
2. What Does STP Do.ts - 61.08 MB
-
3. Understanding STP Standards.ts - 46.67 MB
-
4. How the Root Bridge is Elected.ts - 71.87 MB
-
5. How to Determine Your STP Topology.ts - 104.97 MB
-
6. Configuring Basic STP and Verifying Results.ts - 67.28 MB
-
7. Identifying and Configuring STP Ports and Root Bridge Lab.ts - 78.61 MB
-
8. Review of Design and Configure a Rapid Spanning Tree Protocol (STP) Network.ts - 26.61 MB
-
-
31-Increase Network Capacity Using EtherChannel
-
1. Introduction to Increase Network Capacity Using EtherChannel.ts - 5.93 MB
-
2. What is EtherChannel.ts - 60.37 MB
-
3. Configuring and Verifying EtherChannel.ts - 105.24 MB
-
4. Modifying EtherChannel Load Distribution.ts - 47.33 MB
-
5. Review of Increase Network Capacity Using EtherChannel.ts - 14.11 MB
-
-
32-Configure a Basic Cisco Wireless Network using the WLC GUI
-
1. Introduction to Configure a Basic Cisco Wireless Network using the WLC GUI.ts - 5.22 MB
-
2. Cisco WLC Puzzle Pieces.ts - 42.94 MB
-
3. Accessing a Cisco WLC for the First Time.ts - 45.24 MB
-
4. Base Level WLC Configuration.ts - 72.4 MB
-
5. Review of Configure a Basic Cisco Wireless Network using the WLC GUI.ts - 14.58 MB
-
-
33-Explain End-To-End IP Communications
-
1. Introducing End-To-End IP Communications.ts - 15.61 MB
-
2. TCPIP Protocol Stack Review.ts - 41.09 MB
-
3. Routers and Multilayer Switches.ts - 37.45 MB
-
4. Predicting the Correct L2 and L3 Addresses.ts - 57.14 MB
-
5. Logical and Physical Topologies Lab.ts - 44.43 MB
-
6. Identifying and Correcting a Layer 2 Path.ts - 48.47 MB
-
7. Topology and Lab Strategy.ts - 22.61 MB
-
8. Reviewing End-To-End IP Communications.ts - 5.08 MB
-
-
34-Configure and Verify Cisco IPv4 Static Routes
-
1. Introducing IPv4 Static Routing.ts - 4.81 MB
-
10. Static Routes using an Outbound Interface.ts - 37.32 MB
-
11. IPv4 Static Routes Review.ts - 43.7 MB
-
12. IPv4 Static Route Case Study and Lab.ts - 61.97 MB
-
13. Review of Configure and Verify Cisco IPv4 Static Routes.ts - 57.52 MB
-
2. How a Router Learns IP Routes.ts - 32.84 MB
-
3. Adding Directly Connected IPv4 Routes.ts - 58.54 MB
-
4. Planning Static Network Routes.ts - 52.25 MB
-
5. Configuring Static IPv4 Network Routes.ts - 56.13 MB
-
6. Adding Static Host Routes.ts - 46.17 MB
-
7. Implementing Static Default Routes.ts - 33.54 MB
-
8. Floating Static Routes Overview.ts - 41.29 MB
-
9. Configuring and Verifying Static Floating Routes.ts - 51.96 MB
-
-
35-Configure and Verify Cisco IPv6 Static Routes
-
1. Introducing IPv6 Static Routes.ts - 6.19 MB
-
2. IPv6 Static Route Lab Topology.ts - 24.05 MB
-
3. Adding IPv6 Directly Connected Routes.ts - 60.32 MB
-
4. Planning Static IPv6 Network and Default Routes.ts - 34.53 MB
-
5. Configuring Static IPv6 Default and Network Routes.ts - 49.64 MB
-
6. Floating Static IPv6 Host Routes.ts - 51.33 MB
-
7. IPv6 Static Routes Review.ts - 28.34 MB
-
8. IPv6 Static Route Case Study and Lab.ts - 70.92 MB
-
9. Review of Configure and Verify Cisco IPv6 Static Routes.ts - 12.36 MB
-
-
36-Describe Cisco Dynamic IPv4 Routing with OSPF
-
1. Introducing OSPF Concepts.ts - 3.19 MB
-
10. Verifying OSPF Adjacencies.ts - 40.02 MB
-
11. OSPF LSAs and DRs.ts - 30.98 MB
-
12. OSPF and Point-to-Point Networks.ts - 23.29 MB
-
13. Review of Describe Cisco Dynamic IPv4 Routing with OSPF.ts - 28.19 MB
-
14. OSPF Concepts Wrap-Up.ts - 3.04 MB
-
2. Dynamic vs. Static Routing.ts - 52.32 MB
-
3. OSPF Path Cost.ts - 43.78 MB
-
4. OSPF Router ID (RID).ts - 38.31 MB
-
5. OSPF Areas.ts - 28.49 MB
-
6. Wildcard Masks and Network Statements.ts - 36.47 MB
-
7. OSPF Wildcards on Clean Octet Boundaries.ts - 46.8 MB
-
8. OSPF Wildcards for Subnets.ts - 51.7 MB
-
9. DR and BDRs on Broadcast Networks.ts - 36.21 MB
-
-
37-Implement Cisco Dynamic IPv4 Routing with OSPF
-
1. Introduction to Implement Cisco Dynamic IPv4 Routing with OSPF.ts - 3.84 MB
-
10. Real World OSPF Case Study and Lab.ts - 110.65 MB
-
11. Review of Implement Cisco Dynamic IPv4 Routing with OSPF.ts - 11.3 MB
-
2. Lab Topology Introduction.ts - 18.92 MB
-
3. Implementing Loopbacks for OSPF.ts - 48.81 MB
-
4. Implementing OSPF with Exact Network Statements.ts - 23.46 MB
-
5. Adding more OSPF Routers.ts - 38.02 MB
-
6. OSPF Link Cost Calculation.ts - 53.49 MB
-
7. OSPF Neighbor Adjacencies.ts - 42.88 MB
-
8. Default Routes in OSPF Overview.ts - 23.05 MB
-
9. Implementing a Default Route in OSPF.ts - 38.51 MB
-
-
38-Interpret and Describe a Cisco IP Routing Table
-
1. Introduction to Interpret and Describe a Cisco IP Routing Table.ts - 4.05 MB
-
2. Routing Protocol Codes.ts - 21.77 MB
-
3. Network Prefix and Mask.ts - 21.95 MB
-
4. Next Hop.ts - 30.51 MB
-
5. Administrative Distance (AD).ts - 39.65 MB
-
6. The Routing Table Metric.ts - 22.4 MB
-
7. Gateway of Last Resort.ts - 26.14 MB
-
8. Using a Routing Table in a Production Network.ts - 63.9 MB
-
9. Review of Interpret and Describe a Cisco IP Routing Table.ts - 31.16 MB
-
-
39-Predict a Cisco Router’s IP Forwarding Decisions
-
1. Introduction to Predict a Cisco Router’s IP Forwarding Decisions.ts - 3.45 MB
-
10. Review of Predict a Cisco Router’s IP Forwarding Decisions.ts - 25.12 MB
-
2. Winning Routes of a Router's Table (Concepts).ts - 24.35 MB
-
3. Preferring a Better Route Due to AD Lab.ts - 36.44 MB
-
4. Choosing a Route Based on the Metric or Cost.ts - 28.93 MB
-
5. Concepts of Using the Longest Match in the Routing Table.ts - 15.8 MB
-
6. Longest Match Routing Lab.ts - 51.94 MB
-
7. Identifying Which Routes Include a Specific IP.ts - 62.01 MB
-
8. Route or Drop The Prediction Game.ts - 62.86 MB
-
9. Case Study and Lab Predicting the Router's Decisions.ts - 69.8 MB
-
-
4-Build a Physical Cisco Lab Environment
-
1. Introduction to Build a Physical Cisco Lab Environment.ts - 8.3 MB
-
2. Why Use a Physical Lab.ts - 43.02 MB
-
3. Understanding Common Switch Models.ts - 35.51 MB
-
4. Understanding Common Router Models.ts - 29.16 MB
-
5. Understanding Device Memory Requirements.ts - 29.56 MB
-
6. Understanding Common Modules.ts - 61.79 MB
-
7. Performing Password Recovery.ts - 65.51 MB
-
8. Building a CCNA Lab Environment.ts - 57.9 MB
-
-
40-Configure and Verify Cisco’s Router on a Stick
-
1. Introducing a Router on a Stick.ts - 4.14 MB
-
2. Router on a Stick Concepts.ts - 30.72 MB
-
3. Implementing Router on a Stick.ts - 48.53 MB
-
4. Using Router on a Stick in Production.ts - 54.07 MB
-
5. Review of Configure and Verify Cisco’s Router on a Stick.ts - 12.35 MB
-
-
41-Troubleshoot an IP Network
-
1. Introducing the Troubleshooting Labs.ts - 3.2 MB
-
2. Troubleshooting Tips.ts - 21.77 MB
-
3. Troubleshooting Topology.ts - 18.16 MB
-
4. Trouble Ticket 1 with Guest Jeff Kish.ts - 85.76 MB
-
5. Trouble Ticket 2 with Guest Knox Hutchinson.ts - 56.88 MB
-
6. Trouble Ticket 3 with Guest Bart Castle.ts - 73.61 MB
-
7. Trouble Ticket 4 with Keith Barker.ts - 60.03 MB
-
-
42-Cisco NAT Concepts and Base Configurations Static and Overload
-
1. Introducing Cisco NAT Concepts and Base Configurations.ts - 4.04 MB
-
2. Using Different NAT Strategies.ts - 102.57 MB
-
3. Defining NAT Terminology.ts - 46.13 MB
-
4. Configuring NAT Overload.ts - 121.91 MB
-
5. Configuring Static NAT.ts - 88.3 MB
-
6. Configuring and Verifying Cisco NAT Lab.ts - 68.68 MB
-
7. Reviewing Cisco NAT Concepts and Base Configurations.ts - 29.31 MB
-
-
43-Configure and Verify Cisco NTP
-
1. Introduction to Configure and Verify Cisco NTP.ts - 3.83 MB
-
2. What is NTP.ts - 30.24 MB
-
3. Configuring an NTP Client.ts - 30.41 MB
-
4. Configuring an NTP Server.ts - 30.65 MB
-
5. Review of Configure and Verify Cisco NTP.ts - 13.27 MB
-
-
44-Configure DHCP Server and Relay Functions
-
1. Introduction to Configure DHCP Server and Relay Functions.ts - 5.01 MB
-
2. DHCP Server, Client, and Relay.ts - 51.47 MB
-
3. Configuring a Cisco DHCP Server.ts - 75.81 MB
-
4. Configuring DHCP Relay in a Cisco Network.ts - 47.56 MB
-
5. DHCP Lab.ts - 33.17 MB
-
6. Review of Configure DHCP Server and Relay Functions.ts - 16.44 MB
-
-
45-Explain Common Network Services SNMP, Syslog, QoS, and TFTP-FTP
-
1. Introducing Common Network Services.ts - 4.88 MB
-
2. SNMP.ts - 80.58 MB
-
3. Syslog.ts - 42.8 MB
-
4. QoS.ts - 80.5 MB
-
5. TFTP-FTP.ts - 28.78 MB
-
6. Reviewing Common Network Services.ts - 17.13 MB
-
-
46-Define Key Concepts Regarding Network Security
-
1. Introduction to Define Key Concepts Regarding Network Security.ts - 2.3 MB
-
2. Security Overview and CIA.ts - 16.77 MB
-
3. Vulnerabilities.ts - 24.34 MB
-
4. Exploits.ts - 31.69 MB
-
5. Threats and Risk.ts - 18.38 MB
-
6. Mitigation Techniques and.ts - 37.64 MB
-
7. Review of Define Key Concepts Regarding Network Security.ts - 12.76 MB
-
-
47-Describe Security Program Elements
-
1. Introducing Security Program Elements.ts - 1.54 MB
-
2. Polices as Part of a Security Program.ts - 20.3 MB
-
3. User Awareness and Training.ts - 19.5 MB
-
4. Physical Controls and Review.ts - 23.89 MB
-
-
48-Describe Elements of Secure Password Policies
-
1. Introduction to Describe Elements of Secure Password Policies.ts - 3.85 MB
-
2. Password Policies.ts - 29.79 MB
-
3. Password Managers.ts - 26.36 MB
-
4. Multi-Factor Authentication (MFA).ts - 43.41 MB
-
5. Review of Describe Elements of Secure Password Policies.ts - 16.21 MB
-
-
49-Configure Cisco Device Access Control Using Local Passwords
-
1. Introducing Local Passwords.ts - 3.76 MB
-
2. Default Behavior for Console Access.ts - 35.83 MB
-
3. Default Behavior for Aux Access.ts - 39.84 MB
-
4. Passwords for VTY Login.ts - 39.04 MB
-
5. Storing Local Passwords.ts - 28.34 MB
-
6. Type 9 Local Passwords.ts - 12.24 MB
-
7. Local Usernames and Passwords.ts - 24.39 MB
-
8. Configure Cisco Device Access Control Using Local Passwords Review.ts - 16.61 MB
-
-
5-6 Set Up Packet Tracer for Hands-On Cisco Practice
-
1. Why You'll Benefit from Packet Tracer.ts - 19.56 MB
-
2. Getting and Installing Packet Tracer.ts - 11.27 MB
-
3. Configuring Your First PT Network.ts - 68.88 MB
-
4. Getting Physical.ts - 16.78 MB
-
5. Visualizing Network Traffic with Simple PDUs.ts - 60.79 MB
-
6. Visualizing Network Traffic with Complex PDUs.ts - 44.3 MB
-
7. Replicating a Physical Rack.ts - 45.95 MB
-
8. Using Packet Tracer on your Tablet.ts - 21.96 MB
-
9. Final Challenge and Review.ts - 48.65 MB
-
-
50-Summarize and Differentiate AAA Concepts
-
1. Introducing AAA.ts - 3.56 MB
-
2. AAA Overview.ts - 30.29 MB
-
3. Building Blocks of AAA.ts - 29.07 MB
-
4. AAA New-Model Framework.ts - 25.35 MB
-
5. Commands to Implement AAA.ts - 24.79 MB
-
6. Implementing and Verifying AAA.ts - 60.31 MB
-
7. Summarize and Differentiate AAA Concepts Review.ts - 20.25 MB
-
-
51-Apply and Verify Cisco Access Control Lists
-
1. Introducing Access Control Lists (ACLs) for Packet Filtering.ts - 3.76 MB
-
10. Using Named Extended ACLs.ts - 59.67 MB
-
11. ACL Production Case Study and Lab.ts - 60.97 MB
-
12. Review of Apply and Verify Cisco Access Control Lists.ts - 18.77 MB
-
2. ACL Concepts.ts - 30.47 MB
-
3. Standard ACLs Concepts.ts - 29.61 MB
-
4. Standard ACLs Lab.ts - 43.87 MB
-
5. Wildcard Masks Concepts.ts - 23.2 MB
-
6. Wildcard Masks Lab.ts - 22.69 MB
-
7. Wildcard Masks for Subnets Lab.ts - 31.03 MB
-
8. Extended ACLs Concepts.ts - 21.99 MB
-
9. Extended ACLs Lab.ts - 45.83 MB
-
-
52-Configure and Verify Cisco Port Security
-
1. Introducing Port Security.ts - 4.53 MB
-
2. Understanding Port Security and Why we Need It.ts - 31.22 MB
-
3. Port Security Defaults.ts - 18.7 MB
-
4. Implementing Port Security on Layer 2 Interface.ts - 30.33 MB
-
5. Customizing Port Security.ts - 43.36 MB
-
6. Configuring Auto Errdisable Recovery.ts - 33.92 MB
-
7. Applying Port Security Skills in Production.ts - 26.45 MB
-
8. Review of Configure and Verify Cisco Port Security.ts - 11.69 MB
-
-
53-Configure and Verify Cisco DHCP Snooping
-
1. Introducing DHCP Snooping.ts - 4.33 MB
-
2. Why is DHCP Snooping Needed.ts - 20.61 MB
-
3. The Recipe for DHCP Snooping.ts - 26.66 MB
-
4. Building and Implementing DHCP Snooping in PT.ts - 52.79 MB
-
5. Adding Source Guard to a Switch.ts - 25.21 MB
-
6. Applying DHCP Snooping in Production.ts - 56.13 MB
-
7. Review of Configure and Verify Cisco DHCP Snooping.ts - 13.4 MB
-
-
54-Configure and Verify Cisco Dynamic ARP Inspection
-
1. Introducing Dynamic ARP Inspection (DAI).ts - 2.88 MB
-
2. Why is DAI Needed.ts - 16.23 MB
-
3. The Recipe and Commands for DAI.ts - 17.82 MB
-
4. Implementing DAI.ts - 22.44 MB
-
5. ARP Access Lists for Non-DHCP Devices.ts - 30.21 MB
-
6. Additional DAI Options and Features.ts - 30.28 MB
-
7. Applying DAI to the Production Network.ts - 27.58 MB
-
8. Review of Configure and Verify Cisco Dynamic ARP Inspection.ts - 9.96 MB
-
-
55-Describe Remote Access and Site-to-Site VPNs
-
1. Introducing VPNs.ts - 2.76 MB
-
2. Virtual Private Network (VPN) Overview.ts - 22.54 MB
-
3. Building Blocks for Cryptography.ts - 37.26 MB
-
4. Site-To-Site VPN Concepts.ts - 28.28 MB
-
5. Verifying Site-To-Site Encryption Lab.ts - 43.72 MB
-
6. Remote-Access VPN Concepts.ts - 30.58 MB
-
7. Remote-Access VPN Client Examples.ts - 36.86 MB
-
8. Review of Describe Remote Access and Site-To-Site VPNs.ts - 13.68 MB
-
-
56-Describe, Configure, and Verify Wireless Security protocols
-
1. Introduction to Describe, Configure, and Verify Wireless Security protocols.ts - 4.05 MB
-
2. Wireless Security Protocol Options.ts - 29.39 MB
-
3. Options for Controlling Wi-Fi Networks.ts - 21.2 MB
-
4. Implementing WPA2 PSK on a SOHO Network.ts - 28.99 MB
-
5. Planning WPA2 on a Controller-Based Wi-Fi Network.ts - 18.78 MB
-
6. Implementing WPA2 on a Controller-based Wi-Fi Network.ts - 63.75 MB
-
7. Review of Describe, Configure, and Verify Wireless Security Protocols.ts - 12.68 MB
-
-
57-What is Network Automation
-
1. Introducing Network Automation.ts - 3.76 MB
-
2. What is Network Automation.ts - 24.02 MB
-
3. Automating Network Device Deployment.ts - 54.99 MB
-
4. Automating Network Device Backup, Monitoring, and Data Collection.ts - 46.88 MB
-
5. Automating Network Troubleshooting Lab.ts - 37.75 MB
-
6. Let's Keep Automating.ts - 4.08 MB
-
-
58-Use REST APIs and JSON
-
1. You are a Network Developer.ts - 5.98 MB
-
10. REST API Lab.ts - 39.25 MB
-
11. Becoming a Network Developer.ts - 6.36 MB
-
2. API vs. SNMP vs. CLI.ts - 47.01 MB
-
3. What is a REST API.ts - 33.26 MB
-
4. Navigating a REST API.ts - 40.23 MB
-
5. HTTP Verbs.ts - 55.41 MB
-
6. Programming 101 Data.ts - 66.39 MB
-
7. Programming Playground Lab.ts - 28.9 MB
-
8. JSON, YAML, or XML.ts - 31.03 MB
-
9. Interpreting JSON.ts - 53.9 MB
-
-
59-Controller-Based Networking
-
1. Forget Everything You Know About Networking.ts - 8.05 MB
-
10. DNA Center Lab.ts - 55.13 MB
-
11. Controller-Based Networks Review.ts - 7.3 MB
-
2. Reviewing the Planes.ts - 27.25 MB
-
3. What is Controller-Based Networking.ts - 47.13 MB
-
4. Why do we Need an SDN Controller.ts - 30.51 MB
-
5. SDN Architectures.ts - 43.96 MB
-
6. Automating the Data Center with ACI.ts - 34.8 MB
-
7. Magic of Software-Defined Access.ts - 75.04 MB
-
8. DNA Center Overview.ts - 75.47 MB
-
9. Using Postman with the DNA Center REST API.ts - 51.49 MB
-
-
60-Network Automation Tools Ansible, Puppet, and Chef
-
1. Introducing Ansible, Puppet, and Chef.ts - 5.03 MB
-
2. Configuration Managament with DevOps Tools.ts - 51.22 MB
-
3. Ansible.ts - 61.56 MB
-
4. Puppet.ts - 39.55 MB
-
5. Chef.ts - 25.03 MB
-
6. Summing it All Up.ts - 37.09 MB
-
-
7-Describe Network Functions and Equipment
-
1. Introduction to Describe Network Functions and Equipment.ts - 5.47 MB
-
2. Primary Switch Functions.ts - 45.91 MB
-
3. Primary Wireless Access Point Functions.ts - 40.61 MB
-
4. Primary Router Functions.ts - 46.91 MB
-
5. Assembling the Network Pieces.ts - 46.44 MB
-
6. Review of Describe Network Functions and Equipment.ts - 33.58 MB
-
-
8-Explain Network Communication Using the OSI and TCP-IP Model
-
1. Introduction to Explain Network Communication with the OSI Model.ts - 4.53 MB
-
2. Why We Have Two Models.ts - 20.36 MB
-
3. Application Layers.ts - 27.71 MB
-
4. Transport Layer.ts - 48.47 MB
-
5. Network Layer.ts - 24.65 MB
-
6. Data Link and Physical Layer.ts - 43.4 MB
-
7. Describing Network Communication Using the OSI and TCPIP Models.ts - 68.07 MB
-
8. Review of Explain Network Communication with the OSI Model.ts - 28.33 MB
-
-
9-Describe Common Network Architectures
-
1. Introduction to Describe Common Network Architectures.ts - 3.36 MB
-
2. Two-Tier Architecture.ts - 49.44 MB
-
3. Three-Tier Architecture.ts - 25.44 MB
-
4. Spine-Leaf Architecture.ts - 49.1 MB
-
5. WAN Architecture.ts - 56.17 MB
-
6. SOHO Architecture.ts - 37.5 MB
-
7. On-Premise vs. Cloud Architecture.ts - 22.27 MB
-
8. Building a Network Architecture.ts - 59.69 MB
-
9. Review of Describe Common Network Architectures.ts - 31.72 MB
-
-
| Trackers | Seeders | Leechers | Downloads |
|---|---|---|---|
| udp://tracker.moeking.me:6969/announce | 0 | 0 | 0 |
| udp://tracker.opentrackr.org:1337/announce | 4 | 0 | 12 |
| udp://open.stealth.si:80/announce | 3 | 0 | 645 |
| udp://tracker.torrent.eu.org:451/announce | 3 | 1 | 92 |
| udp://tracker.openbittorrent.com:80/announce | 1 | 0 | 5 |
| udp://tracker4.itzmx.com:2710/announce | 0 | 0 | 0 |
| udp://retracker.lanta-net.ru:2710/announce | 3 | 0 | 5 |
| udp://exodus.desync.com:6969/announce | 3 | 0 | 0 |
| udp://explodie.org:6969/announce | 0 | 0 | 0 |
| udp://tracker.internetwarriors.net:1337/announce | 2 | 0 | 0 |
InfoHash:
372743EBBD1B377A1EC2A8E274F415EEF197E670
Last updated:
Jan 25, 2022
File count:
415 B
File Category:
1
Tags:
nuggets, cisco, certification, training, ccna